The Canon Pixma MG2522 is an all-in-one inkjet printer with copying and scanning features. It is supported by both Windows and macOS. You may swap to the multi-color ink cartridge when one colour runs out. The Canon MG2522 printer has no display screen. Networking is not an option; there is only support for a straight USB connection. When it is configured for use, the Canon Pixma Mg2522 Setup needs a space that is 9.3 inches high by 16.7 inches wide by 22.6 inches deep.
The steps shown below might help you connect your Canon Pixma MG2522 printer to wifi. There are several ways to connect, including wireless, USB, and wireless.
Setup guide for the Canon Pixma MG2522 printer.
Additionally, setting it up is quite straightforward. However, we’ve included Canon Pixma Mg2522 Wireless Setup instructions for both Windows and Mac systems to make things simpler. Therefore, it is suggested that all users set up the printer using the setup instructions below.
- Before you can configure the printer’s settings and install the cartridges, you must first unpack your Canon Pixma MG2522 printer.
- Make sure the printer is well sealed before you unpack it.
- Unpacking it and moving it closer to the wall socket are the following steps.
- To configure the printer, plug in the power cable, switch it on, and press the power button.
- Click “Save” to confirm your selections for the language, country, display date, and time.
- Open the cartridge access door and wait for the slot to move a little to either side before removing the new cartridge from its box and inserting it into the slot.
- Try printing to test the printer after completing the aforementioned steps.
Guide for connecting your LAN network to the Canon Pixma MG2522 printer
To connect wirelessly, the printer must be connected to the same Wi-Fi network as the computer, tablet, or other device. All users are urged to adhere to the guidelines below to connect your printer to WiFi: –
- Turn on your Canon MG2522 by pressing the power button.
- On the printer, tap the wireless connection option, then choose LAN settings.
- When the settings for the gadget, smartphone, or other device are finished, select the wireless LAN setup by tapping yes. OK? The option is displayed on your screen.
- Choose the device you want to connect it to, then click Start Setup in the next step.
- Depending on your preferences, choose the connection method.
- To connect the printer to the router, provide the login credentials.
- After a brief wait, a printout can be used to check the configuration of the Canon Pixma MG2522 Printer.
References: Canon Printer Mg2522 Wireless Setup