Itexamdump를 선택함으로, Itexamdump는 여러분CIPS인증L4M7시험을 패스할 수 있도록 보장하고,만약 시험실패시 Itexamdump에서는 덤프비용전액환불을 약속합니다, L4M7인증시험에 도전해보려는 분들은 회사에 다니는 분들이 대부분입니다, 저희CIPS L4M7덤프는 자주 업데이트되고 오래된 문제는 바로 삭제해버리고 최신 문제들을 추가하여 고객님께 가장 정확한 덤프를 제공해드릴수 있도록 하고 있습니다, 마술처럼 L4M7합격이 실현될것입니다, CIPS인증 L4M7시험을 패스하려면Itexamdump가 고객님의 곁을 지켜드립니다, 때문에 우리Itexamdump를 선택함으로CIPS인증L4M7시험준비에는 최고의 자료입니다.
단지 준이 모르는 곳에서, 다른 사람의 말만 듣고 그렇게 중요한 결정을 내리고(https://www.itexamdump.com/cips-whole-life-asset-management_dumps14902.html)싶지 않아요, 클리셰의 양팔에서 불과 얼음이 노래를 부르기 시작했다, 묻자 한주가 알 바 아니라는 듯 말했다, 미정의 방을 담당하는 도우미가 머뭇거릴 정도였다.
요소사는 그렇게 말하며 여자의 목에 돋아난 힘줄을 어루만졌다, 그랬구나, 그래, 너는 여기, L4M7퍼펙트 인증공부자료초고가 융에게 시범을 보였다, 네가 어떻게 집마맹의 내부의 일을 알아, 소중한 것을 잃은 사람이 으레 보이는 그 서러움을 맥없이 터트렸다면 이리 선명하게 가슴 아리진 않았으리라.
아니, 고양이보다는 훨씬 덩치가 크고 육감적인 표범인가, 홱 등 돌려 전시회장을L4M7퍼펙트 공부문제나가려는 혜진의 뒤로, 현우가 경고했다, 고민 없이 뱉어내는 유나의 말들이 의도치 않게 지욱에게 확인 사살시키는 꼴이 됐다, 고자로 만들어 버려서 죄송합니다.
진화물리학을 무시하고 있죠, 기다리고 있던 전화였으므로, 현우는 밖으로 나가L4M7완벽한 공부문제전화를 받았다, 계정을 사용 중지하기 전에 패키지를 사용하지 않으면 사용하지 않은 사례가 없어지고 환불을 받을 수 없습니다, 이미 포토샵으로 유명하지 않은가?
예안님 손에 닿고도 무사한 그림은 처음이어요, 그를 위해선 미쳐도, 죽어도L4M7공부문제좋다고 생각하지 않았는가, 다 떠나서 이러한 일들은 없어야 한다고 생각합니다, 침상 구석에 보이는 머리끈을 발견하는데 또 다시 노크소리가 들렸다.
싸움을 말리지 않고 방조를 한 이들도 마찬가지다, 그나저나 그만 기분 풀어, 분명히 귀를 통L4M7높은 통과율 덤프문제해 말이 들려오는데, 그게 무슨 뜻인지 머리에서 이해를 하지 못하고 있는 것이다, 내가 간다, 내가 가, 아, 그리고 최소 일주일간은 격렬한 운동이나 사우나는 되도록 피하는 게 좋은데.
최신 L4M7 높은 통과율 덤프문제 인증덤프공부
신난이 가진 바구니를 뒤로 빼며L4M7높은 통과율 덤프문제말했다, 정도의 이야기이리라, 당장 신난을 치료의 방으로 데려가라.
CIPS Whole Life Asset Management 덤프 다운받기
NEW QUESTION 25
Which of the following is an assumption of economic-order-quantity model?
- A. No inventory stockouts occur
- B. Demand, ordering costs, and carrying costs are uncertain
- C. The quantity ordered can vary at each reorder point
- D. The purchasing cost per unit is affected by the order quantity
Economic order quantity (EOQ) model is the method that provides the company with an order quantity. This order quantity figure is where the record holding costs and ordering costs are mini-mized. By using this model, the companies can minimize the costs associated with the ordering and inventory holding. In 1913, Ford W.
Harris developed this formula whereas R. H. Wilson is given credit for the application and in-depth analysis on this model.
If the economic order quantity model is applied, the following assumptions should be met:
– The rate of demand is constant, and total demand is known in advance.
– The ordering cost is constant.
– The unit price of inventory is constant, i.e., no discount is applied depending on order quantity.
– Delivery time is constant.
– Replacement of defective units is instantaneous.
– There is no safety stock level, i.e., the minimum stock level is zero.
– Restocking is made by the whole batch.
Because the demand and lead time are constant, no stockout events can occur.
LO 2, AC 2.3
NEW QUESTION 26
Which of the following should be considered when an organisation plans for disposing obsolescent and redundant stock? Select TWO that apply.
- A. Takt time
- B. Environmental issues
- C. Economic order quantity
- D. ABC analysis
- E. Financial costs
If the planning and mitigation measures fail and redundant or obsolete stock is identified, it needs to be removed from the current inventory location as quickly as possible. There are some methods to deal with these types of stock. The worst case scenario is disposal to landfill, which is inadvisable if it can be avoided, both from environment point of view and the financial costs of such disposal.
For example, the problem of obsolete pesticides remains extremely serious and urgent. Many of the stocks identified continue to deteriorate thereby giving rise to an ever escalating source of severe pollution and posing a threat to human health, the environment and development in particular. To reduce the impact of obsolete pesticides on environment, FAO initiated a project in Yemen in which a total of 262 tonnes of obsolete pesticides were removed from 20 different sites and successfully disposed of between March and June 1996. The major field operation was completed in six weeks during which period almost all obsolete pesticides were brought to a central location and subsequently shipped to the United Kingdom for incineration.
LO 2, AC 2.1
NEW QUESTION 27
Among different types of costs associated with inventory, the costs of obtaining purchase approvals are…?
- A. Acquisition costs
- B. Costs of stockouts
- C. Purchasing price
- D. Holding costs
Direct and indirect costs of holding inventory include the following:
– Acquisition costs: preparing the requisition, supplier selection and approvals, time and costs of the procurement process, etc.
– Holding costs
– Costs of stockouts
LO 2, AC 2.2
NEW QUESTION 28
Which of the following statements is true?
- A. Dependent demand items are not directly correlated with production rate
- B. All indirect supplies are independent demand items
- C. Car engine is an example of independent demand items in a car assembly plant
- D. Number of independent demand items may be derived from the forecast
Dependent demand is the requirement for stock item which is directly related to and therefore de-pendent upon the rate of production (examples are: raw materials, components, energy).
Independent demand is the requirement for stock item which is not directly related to, and is therefore independent of rate of production.
‘Number of independent demand items may be derived from the forecast’: Although independent demand is called thus, it can still be influenced by economic factors external to the demand-supply model such as general consumer sentiment and consumers’ available disposal income. However, businesses that need to predict the number of products with independent demand needed to sate their customers have it easier than businesses that must calculate the demand for products with dependent demand because there are fewer factors to consider.
‘Dependent demand items are not directly correlated with production rate’: As mentioned above, dependent demand items are directly correlated with production rate.
‘All indirect supplies are independent demand items’: Though most indirect supplier are inde-pendent demand, some are determined by the production rate, i.e. energy consumption of a major machinery.
‘Car engine is an example of independent demand items in a car assembly plant’: Car engine is a component in car which is the finished good of a car assembly plant, it is a dependent demand item.
LO 2, AC 2.1
NEW QUESTION 29
With D is the annual demand (units), S is cost per order, H is annual carrying cost per unit; the formula for Economic Order Quantity is….?
- A. √(2D*S/H)
- B. √(D*S/2H)
- C. √(D*S*H)
- D. √(D*S/3H)
LO 2, AC 2.3
NEW QUESTION 30